How to Install Your Electric Cargo Bike Rain Cover

Updated on
Comment installer la protection de pluie de votre vélo cargo Colibri - Batoo - Batoo Bike

With the arrival of rainy days, it is essential to protect your passengers and your cargo on your cargo bike.

Batoo's rain cover is a great accessory to ensure a dry ride, even in bad weather. Here's a simple guide to installing and using this rain cover.

Rain protection for electric bikes:

Cargo bike rain cover electric bike is presented as a sturdy and waterproof canvas cabin mounted on a frame which attaches to the metal structure of the safety bars or protective barrier that you have purchased in order to transport children on your electric bike.

This cabin is perfect for protecting your passengers in rainy weather but also ideal as a sunshade in summer. It also allows you to enjoy good ventilation when it is hot since the window sides of the cabin can be opened, the sides are thus folding.

The windows that frame the protective cabin are transparent, so your passengers enjoy a clear view.

This accessory for your cargo bike Electric Colibri remains very useful, it is absolutely necessary to have it and, even more so if you often transport your children and/or goods.

How to install the rain cover for bike, rain cover cabin of your Colibri electric bike let's see this in detail.

Step-by-step installation of your rain protection cabin:

First of all, you will need a few small tools including:

  • A 4mm Allen key
  • A torque wrench (set to 10 Nm).

Step 1: Prepare for installation

Start by removing the battery from your bike and make sure to discharge the remaining energy by holding down the MODE button.

Now open the box of your rain protection cabin. Inside you should find:

  • A senior executive x1
  • Feet x4
  • Protective fabric cover x1
  • Installation instructions

Step 2: Frame assembly

The frame consists of four legs and a top frame. Orient the legs as shown in the manual. Each leg has a metal notch. By pressing this button, slide the legs into the frame until they lock into place. Then, orient the frame so that it is tilted toward the rear of the bike, and secure the legs by sliding them onto the bolts on the outer rails of the Hummingbird . Use the Allen key to tighten the bolts with a force of 10 Nm.

Take the installation instructions in hand, to mount the frame on the bike, take the frame in question, then orient the 4 feet as indicated in the instructions knowing that each of the feet has a notch or metal button.

So you need to lock each of the legs by pressing the button when you place them on the upper frame.

Next, orient the frame so that it is tilted towards the rear of the bike, then attach the feet by sliding them onto the bolts on the outer rails of your Colibri bike (see photo below).

Use the Allen key to tighten the bolts with a force of 10 Nm.

Step 3: Installing the rain cover

The rain cover is designed to cover the entire frame. Make sure the reflective strips are positioned on the back and sides. Open the corner zippers before placing the cover on the frame. Once the cover is in place, secure all the Velcro straps around the tubes of the cover and the Hummingbird . Finally, secure the roof straps around the top tube of the frame and buckle the clips.

The cover is designed to cover the entire frame. First, make sure the reflective strips are positioned on the back and sides. Now, open the corner zippers before placing the cover on the frame. Once the cover is in place, you will need to secure all the Velcro straps around the cabin frame tubes and the bike that are concerned. Finally, secure the roof straps around the top tube of the frame and buckle the clips (see photo below).

Step 4: Use and ventilation

To place your child inside the cabin, you need to open a side window of the protective cabin, then fold down the panel on top of the cabin roof.

Don't forget the child's bicycle helmet , fasten it properly.

If you are carrying a baby, he or she will be comfortably seated in a baby seat and securely fastened as well. Once the child is well protected and installed, all you have to do is close the side window flap.

To provide good ventilation for your passenger, it is possible to open the vertical zippers at the front as well as the horizontal zipper at the back.

When it's very hot, when cycling in the sun, the side flaps can be folded over the top of the cabin roof (see photo below).

The roof of the cabin protects the child from the sun, and the side openings allow him to have air.

How to properly maintain your protective cover?

To properly maintain your protective cover and extend its lifespan, a few precautions should be taken.

To clean it, use a damp cloth, or better still a microfibre cloth, then let it air dry before storing your rain cover.

To store it, be sure to fold the protective cover flat to avoid creasing the windows. Then, put it in plastic to prevent it from collecting dust.

If you decide to leave your cabin on your bike, avoid exposing yourself to direct sunlight, as this could quickly damage your protection.

Conclusion

With these simple steps, you can install and use the rain cover for your Batoo cargo bike effectively. This accessory will allow you to continue your journeys, even in the rain, while protecting your passengers and your goods. Remember to adjust the ventilation properly and drive carefully in difficult weather conditions to ensure a safe journey.

There you have it, by following all the above steps carefully, you should quickly and properly install your Colibri electric cargo bike rain cover.

With this protective cabin, your children, your passengers will be well protected from the rain and the sun, as well as the goods that you can also transport.

In difficult weather conditions, do not hesitate to take a break to wait for a lull, be very careful when driving in the rain, moderate your speed and keep your distance.

It may not be necessary to remind you, but, above all, in rainy weather and with children behind you, be extra careful!

Have a good trip, rain or shine, your passengers will be well protected!

Frequently Asked Questions (FAQ)

How do I protect my bike from the rain?

In the rain to protect your bike, it is always good to have a waterproof cover especially for an electric bike although you will be careful to take the battery with you.

How to protect your bike outdoors?

To protect your bike outdoors, from a security point of view, you will need a sturdy security lock, from a protection point of view, a bike cover will be useful.

How to avoid getting wet when cycling?

To avoid getting wet while cycling, it is best to equip yourself with specific clothing for rain and for cycling, the rain poncho is a very practical accessory.

How to ride a bike in the rain?

When cycling in the rain, you should moderate your speed, leave a good distance between you and a car, wear rain gear with reflective strips in case of heavy rain, and in case of a storm, it is better to take a break.

How do I protect my bike from the rain?

The best way to protect your bike from the rain is to have a bike cover that covers the entire bike, some covers only cover from the saddle, better a full cover so that the entire bike is protected.

Is it bad to leave my bike in the rain?

It is not recommended to leave your bike in the rain, humidity can make certain parts of the bike slippery, pedals, saddle, brakes, this increases the risk of falls after skidding.

How to protect your bike from humidity?

The best way to protect your bike from moisture is to keep it in a cool, dry place, or in a covered area. After getting caught in the rain, it's best to dry the parts thoroughly with a microfiber cloth when you get home.

Updated on